When customizing wooden chest of drawers, accurate measurement and space planning are key steps to ensure that the chest of drawers fit perfectly.
First, understand the specific placement area and surrounding environment of the custom chest of drawers. This includes whether the ground is flat, whether the wall is vertical, and whether there are other furniture or obstacles around. These factors will directly affect the size and layout design of the chest of drawers.
Second, prepare accurate measuring tools, such as tape measures, level rulers, etc. Make sure the scale of the measuring tool is clear and accurate to avoid measurement errors caused by tool errors.
Next, take multiple measurements and take the average. Measure the placement area of the chest of drawers on three sides (plane, elevation, side) and mark the precise dimensions. Especially for chest of drawers with sliding doors or sliding drawers, it is even more necessary to ensure the accuracy of the measurement to reduce errors during installation.
In addition, consider reserving space. When measuring, you need to reserve enough operating space, such as the space required to open doors and pull drawers, as well as the spacing from other furniture or objects. These reserved spaces will ensure that the chest of drawers will not be obstructed during use.
At the same time, communicate fully with the customer. During the measurement process, confirm with the customer their special needs or possible changes to the situation on site, such as planned renovation changes. This will help the designer take these factors into account when designing and ensure the suitability of the chest of drawers.
After the measurement is completed, carefully check the measurement data to ensure that it is correct. Compare the measurement data with the design drawings to ensure that the size and layout of the chest of drawers match the actual situation on site.
Finally, customize the design based on the measurement data and customer needs. The designer will combine the measurement data and the specific needs of the customer to design chest of drawers that are both beautiful and practical. During the production process, a second re-measurement is required to ensure that the size of the final product fully matches the actual situation on site.
